LEGACY MODELS
DPM
DPM
DPM 1412 CFX
BackModel | DPM1412CFX |
Mono Channels | Microphone input: Electronically balanced, discrete input configuration Frequency response: 20Hz to 22KHz, +/-3dB Distortion (THD&N): 0.03% at 1KHz Sensitivity: -40dBu SNR: =92 dBu PAD: -20dB Phantom power: +48V with switch control Line input: Electronically balanced Frequency response: 20Hz to 22KHz, +/-3dB Distortion(THD&N): 0.03% at 1KHz Sensitivity range: -20dB |
Stereo Channels | Line input: Electronically balanced, discrete input configuration Frequency response: 20Hz-55KHz, +/-3 dB Distortion (THD&N): 0.01% at 1KHz Sensitivity range: -40dBu SNR: =92 dBu Phantom power: +48V with switch control Line input: Electronically balanced Frequency response: 20Hz-22KHz, +/-3 dB Distortion (THD&N): 0.03% at 1KHz Sensitivity range: 0dBu |
Impedances | Microphone input: 1.4K Ohm All other input: 10K Ohm or greater Tape out: 1K Ohm All other out: 120 Ohm |
Channels EQ (mono) | High: +/-15dB@12KHz Mid: +/-12dB@2.5Hz Low: +/-15dB@80Hz |
Channels EQ (stereo) | High: +/-15dB@12KHz Mid: +/-12dB@2.5Hz Low: +/-15dB@80Hz |
DSP Section | A/D and D/A converters: 24bit DSP resolution: 24bit Type of effects: VOCAL,SMALL++ ROOM,LARGE HALL,ECHO,ECHO+VERB / FLANGE+VERB,PLATE,CHORUS+GTR,ROTARY+GTR,TREMOLO+GTR Presets: 100 Controls: 100 position preset selector(10 preseter*10variation) / Mute switch & Foot-switching with LED indicator |
LAMP | Pin2(+) and pin1(-): +12V DC/0.5A |
Main Mix Section | MAX. Output: 0dBu unbalanced, 1/4' jacks Max output: +22dBu balanced/unbalanced. 1/4' jacks Main, Monitor EQ: +/-15dB @ 7 bands(63,140,400,1K,2.5K,6.3K,16KHz) Noise (BUS noise): =-70dB @ 200Hz~22KHz (channel & MAIN at 0dB, other at minimum, DSP mute) |
Compressor | Threshold: -40dB~+22dB Comp./Lim.: Ratio (variable) 2:1 to 8:1(limit); attack Time: 1ms; release time: 2s |
Power Section (1000W mode) | Power continuous / 1KHz, THD 0.5%: 2*390W @4ohm / 2*240W @8ohm Power EIAJ 1KHz, THD 1%: 2*500W @4ohm / 2*270W @8ohm Bridged mode: 1000W @8ohm / 520W @16ohm |
Protection | Thermal protection: Over-temperature power limiting / Thermal shutdown Short protection: Short-circuit protection / Overload output protection Voltage protection (for THE T.MIX DPM 1064): Clip limiter / Permanent signal limiter Limiter (for THE T.MIX DPM 1094): High frequency protection |
Static PowerConsumption | No output power State at 230V: =38W |
Power Supply | Main voltage: 100-120VAC ~60Hz; 220-240VAC ~50Hz |
Physical | Dimension( W*D*H): 55.1 x 48.2 x 22.8cm Net weight: 9.83 |